R&S FSL Remote Commands - WiMAX, WiBro Measurements Option (K92/K93)
1300.2519.12 6.755 E-11
Remote Commands of the WiMAX, WiBro
Measurements Option (K92/K93)
This section describes the remote commands for the WiMAX IEEE 802.16 OFDM, OFDMA
Measurements option (R&S FSL–K93). This option includes the functionality of the WiMAX 802.16
OFDM Measurements option (R&S FSL–K92). Accordingly both options are described together in this
section, differentiated by the corresponding standards:
• WiMAX 802.16 OFDM Measurements (R&S FSL–K92/K93)
– IEEE 802.16–2004/Cor 1–2005 OFDM physical layer mode
The corresponding remote control mode is OFDM. In chapter "Instrument Functions", the short
forms IEEE 802.16–2004 OFDM is used to reference this standard.
• WiMAX IEEE 802.16 OFDM, OFDMA Measurements option (R&S FSL–K93)
– IEEE 802.16–2004/Cor 1–2005, IEEE 802.16e–2005 OFDMA physical layer mode
The corresponding remote control mode is OFDMA. In chapter "Instrument Functions", the
short form IEEE 802.16e–2005 OFDMA is used to reference this standard.
– IEEE 802.16–2004/Cor 1–2005, IEEE 802.16e–2005 based WiBro
The corresponding remote control mode is WiBro. In chapter "Instrument Functions", the short
form IEEE 802.16e–2005 WiBro is used to reference this standard.
For details on conventions used in this chapter refer to section "Notation" on page 6.2 at the beginning
of this chapter.
For further information on analyzer or basic settings commands, refer to the corresponding subsystem
in section "Remote Commands of the Base Unit" on page 6.5.
The options are available from firmware version 1.40 (R&S FSL–K92) and 1.50 (R&S FSL–K93).
Subsystems of the WiMAX, WiBro Measurements options (K92/K93)
– "ABORt Subsystem (WiMAX, K92/K93)" on page 6.757
– "CALCulate:BURSt Subsystem (WiMAX, K92/K93)" on page 6.758
– "CALCulate:LIMit Subsystem (WiMAX, K92/K93)" on page 6.759
– "CALCulate:MARKer Subsystem (WiMAX, K92/K93)" on page 6.775
– "CONFigure Subsystem (WiMAX, K92/K93)" on page 6.783
– "DISPlay Subsystem (WiMAX, K92/K93)" on page 6.811
– "FETCh Subsystem (WiMAX, K92/K93)" on page 6.816
– "FORMat Subsystem (WiMAX, K92/K93)" on page 6.828
– "INITiate Subsystem (WiMAX, K92/K93)" on page 6.829
– "INPut Subsystem (WiMAX, K92/K93)" on page 6.830
– "INSTrument Subsystem (WiMAX, K92/K93)" on page 6.831
– "MMEMory Subsystem (WiMAX, K92/K93)" on page 6.832
– "SENSe Subsystem (WiMAX, K92/K93)" on page 6.834
– "STATus Subsystem (WiMAX, K92/K93)" on page 6.851
– "SYSTEM Subsystem (WiMAX, K92/K93)" on page 6.855
– "TRACe Subsystem (WiMAX, K92/K93)" on page 6.856
To Next Page
Loading...
