TRACe Subsystem (Analog Demodulation, K7) R&S FSL
1300.2519.12 6.328 E-11
TRACe Subsystem (Analog Demodulation, K7)
The TRACe subsystem controls access to the instruments internal trace memory.
Commands of the TRACe Subsystem
– TRACe<1|2>[:DATA]
TRACe<1|2>[:DATA]
If the analog demodulator (option Analog Demodulation, R&S FSL–K7) is active, only the
displayed trace data is read out and recalled. A portion of the measurement data that can be
called by means of a marker, however, is calculated from the raw measurement data. These
results are no longer available after recalling a trace; the associated queries generate a query
error.
For further information refer to "TRACe<1|2>[:DATA]" on page 6.263.
To Next Page
Loading...
