Rohde & Schwarz R&S FSL3 - Setting the Level Display and Configuring the RF Input - AMPT Key

R&S FSL Setting the Level Display and Configuring the RF Input – AMPT Key
1300.2519.12 4.13 E-11
Setting the Level Display and Configuring the RF Input –
AMPT Key
The AMPT key is used to set the reference level, the level range and unit, the scaling and the RF
attenuation.
To open the amplitude menu
 Press the AMPT key.
The amplitude menu is displayed. The Reference Level dialog box is displayed.
Menu and softkey description
– "Softkeys of the amplitude menu" on page 4.14
To display help to a softkey, press the HELP key and then the softkey for which you want to display
help. To close the help window, press the ESC key. For further information refer to section "How to use
the Help System".
Task
– To specify the amplitude