Rohde & Schwarz R&S FSL3 - Calculate Subsystem (SPECM, K14)

CALCulate Subsystem (SPECM, K14) R&S FSL
1300.2519.12 6.390 E-11
CALCulate Subsystem (SPECM, K14)
The CALCulate subsystem contains commands for converting instrument data, transforming and
carrying out corrections. These functions are carried out subsequent to data acquisition, i.e. following
the SENSe subsystem.
The following subsystems are included:
• "CALCulate:DELTamarker:SPECtrogram Subsystem (SPECM, K14)" on page 6.390
• "CALCulate:MARKer:SPECtrogram Subsystem (SPECM, K14)" on page 6.396
• "CALCulate:SPECtrogram Subsystem (SPECM, K14)" on page 6.402
Note: For the search commands in x direction refer to the base unit, section "CALCulate:MARKer
Subsystem" on page 6.55.
CALCulate:DELTamarker:SPECtrogram Subsystem (SPECM, K14)
The CALCulate:DELTamarker:SPECtrogram subsystem controls the delta marker functions of the
Spectrogram Measurement option.
Commands of the CALCulate:DELTamarker:SPECtrogram Subsystem
– CALCulate<1|2>:DELTamarker<1...4>:SPECtrogram:FRAMe
– CALCulate<1|2>:DELTamarker<1...4>:SPECtrogram:SARea
– CALCulate<1|2>:DELTamarker<1...4>:SPECtrogram:XY:MAXimum[:PEAK]
– CALCulate<1|2>:DELTamarker<1...4>:SPECtrogram:XY:MINimum[:PEAK]
– CALCulate<1|2>:DELTamarker<1...4>:SPECtrogram:Y:MAXimum[:PEAK]
– CALCulate<1|2>:DELTamarker<1...4>:SPECtrogram:Y:MAXimum:ABOVe
– CALCulate<1|2>:DELTamarker<1...4>:SPECtrogram:Y:MAXimum:BELow
– CALCulate<1|2>:DELTamarker<1...4>:SPECtrogram:Y:MAXimum:NEXT
– CALCulate<1|2>:DELTamarker<1...4>:SPECtrogram:Y:MINimum[:PEAK]
– CALCulate<1|2>:DELTamarker<1...4>:SPECtrogram:Y:MINimum:ABOVe
– CALCulate<1|2>:DELTamarker<1...4>:SPECtrogram:Y:MINimum:BELow
– CALCulate<1|2>:DELTamarker<1...4>:SPECtrogram:Y:MINimum:NEXT