Rohde & Schwarz R&S FSL3 - Page 814

R&S FSL CALCulate Subsystem
1300.2519.12 6.55 E-11
CALCulate:MARKer Subsystem
The CALCulate:MARKer subsystem checks the marker functions of the instrument.
The following subsystem is included:
• "CALCulate:MARKer:FUNCtion Subsystem" on page 6.68
Commands of the CALCulate:MARKer Subsystem
– CALCulate<1|2>:MARKer<1...4>[:STATe]
– CALCulate<1|2>:MARKer<1...4>:AOFF
– CALCulate<1|2>:MARKer<1...4>:COUNt
– CALCulate<1|2>:MARKer<1...4>:COUNt:FREQuency?
– CALCulate<1|2>:MARKer<1...4>:COUNt:RESolution
– CALCulate<1|2>:MARKer<1...4>:LOEXclude
– CALCulate<1|2>:MARKer<1...4>:MAXimum[:PEAK]
– CALCulate<1|2>:MARKer<1...4>:MAXimum:AUTO
– CALCulate<1|2>:MARKer<1...4>:MAXimum:LEFT
– CALCulate<1|2>:MARKer<1...4>:MAXimum:NEXT
– CALCulate<1|2>:MARKer<1...4>:MAXimum:RIGHt
– CALCulate<1|2>:MARKer<1...4>:MINimum[:PEAK]
– CALCulate<1|2>:MARKer<1...4>:MINimum:AUTO
– CALCulate<1|2>:MARKer<1...4>:MINimum:LEFT
– CALCulate<1|2>:MARKer<1...4>:MINimum:NEXT
– CALCulate<1|2>:MARKer<1...4>:MINimum:RIGHt
– CALCulate<1|2>:MARKer<1...4>:PEXCursion
– CALCulate<1|2>:MARKer<1...4>:TRACe
– CALCulate<1|2>:MARKer<1...4>:X
– CALCulate<1|2>:MARKer<1...4>:X:SLIMits[:STATe]
– CALCulate<1|2>:MARKer<1...4>:X:SLIMits:LEFT
– CALCulate<1|2>:MARKer<1...4>:X:SLIMits:RIGHT
– CALCulate<1|2>:MARKer<1...4>:X:SSIZe
– CALCulate<1|2>:MARKer<1...4>:Y?
– CALCulate<1|2>:MARKer<1...4>:Y:PERCent