Rohde & Schwarz R&S FSL3 - Calculate:limit Subsystem (Wimax, K92;K93)

R&S FSL CALCulate:LIMit Subsystem (WiMAX, K92/K93)
1300.2519.12 6.759 E-11
CALCulate:LIMit Subsystem (WiMAX, K92/K93)
The CALCulate:LIMit subsystem contains commands for the limit lines and the corresponding limit
checks.
Commands of the CALCulate:LIMit Subsystem
– CALCulate<1|2>:LIMit<1...8>:FAIL?
– CALCulate<1|2>:LIMit<1...8>:BURSt:ALL
– CALCulate<1|2>:LIMit<1...8>:BURSt:ALL:RESult?
– CALCulate<1|2>:LIMit<1..8>:BURSt:BERPilot[:AVERage]
– CALCulate<1|2>:LIMit<1...8>:BURSt:BERPilot[:AVERage]:RESult?
– CALCulate<1|2>:LIMit<1...8>:BURSt:BERPilot:MAXimum
– CALCulate<1|2>:LIMit<1...8>:BURSt:BERPilot:MAXimum:RESult?
– CALCulate<1|2>:LIMit<1...8>:BURSt:EVM:ALL[:AVERage]
– CALCulate<1|2>:LIMit<1...8>:BURSt:EVM:ALL[:AVERage]:RESult?
– CALCulate<1|2>:LIMit<1...8>:BURSt:EVM:ALL:MAXimum
– CALCulate<1|2>:LIMit<1...8>:BURSt:EVM:ALL:MAXimum:RESult?
– CALCulate<1|2>:LIMit<1...8>:BURSt:EVM:DATA[:AVERage]
– CALCulate<1|2>:LIMit<1...8>:BURSt:EVM:DATA[:AVERage]:RESult?
– CALCulate<1|2>:LIMit<1...8>:BURSt:EVM:DATA:MAXimum
– CALCulate<1|2>:LIMit<1...8>:BURSt:EVM:DATA:MAXimum:RESult?
– CALCulate<1|2>:LIMit<1...8>:BURSt:FERRor[:AVERage]
– CALCulate<1|2>:LIMit<1...8>:BURSt:FERRor[:AVERage]:RESult?
– CALCulate<1|2>:LIMit<1...8>:BURSt:FERRor:MAXimum
– CALCulate<1|2>:LIMit<1...8>:BURSt:FERRor:MAXimum:RESult?
– CALCulate<1|2>:LIMit<1...8>:BURSt:IQOFfset[:AVERage]
– CALCulate<1|2>:LIMit<1...8>:BURSt:IQOFfset[:AVERage]:RESult?
– CALCulate<1|2>:LIMit<1...8>:BURSt:IQOFfset:MAXimum
– CALCulate<1|2>:LIMit<1...8>:BURSt:IQOFfset:MAXimum:RESult?
– CALCulate<1|2>:LIMit<1...8>:BURSt:SSTiming[:AVERage]
– CALCulate<1|2>:LIMit<1...8>:BURSt:SSTiming[:AVERage]:RESult?
– CALCulate<1|2>:LIMit<1...8>:BURSt:SSTiming:MAXimum
– CALCulate<1|2>:LIMit<1...8>:BURSt:SSTiming:MAXimum:RESult?
– CALCulate<1|2>:LIMit<1...8>:BURSt:SYMBolerror[:AVERage]
– CALCulate<1|2>:LIMit<1...8>:BURSt:SYMBolerror[:AVERage]:RESult?
– CALCulate<1|2>:LIMit<1...8>:BURSt:SYMBolerror:MAXimum
– CALCulate<1|2>:LIMit<1...8>:BURSt:SYMBolerror:MAXimum:RESult?
– CALCulate<1|2>:LIMit<1...8>:SPECtrum:MASK:CHECk:X?
– CALCulate<1|2>:LIMit<1...8>:SPECtrum:MASK:CHECk:Y?