CALCulate:LIMit Subsystem (WiMAX, K92/K93) R&S FSL
1300.2519.12 6.770 E-11
Example
CALC:LIM:BURS:IQOF:MAX:RES?
Maximum IQ offset error limit result is returned.
Characteristics
*RST value: –
SCPI: device–specific
Mode
OFDM, OFDMA/WiBro
CALCulate<1|2>:LIMit<1...8>:BURSt:SSTiming[:AVERage]
This command is only supported for reasons of compatibility with the FSP family. It sets the
average Subscriber Station Timing limit.
The numeric suffixes <1|2> sets the measurement window for the calculation and the suffixes
<1...8> specify the limit lines (see CALCulate<1|2>:LIMit<1...8>:FAIL? command).
Parameter
0PCT
Example
CALC:LIM:BURS:SST 0
The average SS Timing limit is set to 0%.
Characteristics
RST value: –
SCPI: device–specific
Mode
OFDM, OFDMA/WiBro
CALCulate<1|2>:LIMit<1...8>:BURSt:SSTiming[:AVERage]:RESult?
This command returns the average Subscriber Station Timing limit result.
The numeric suffixes <1|2> sets the measurement window for the calculation and the suffixes
<1...8> specify the limit lines (see CALCulate<1|2>:LIMit<1...8>:FAIL? command).
This command is only a query and therefore has no *RST value.
Return values
0 PASSED
1 FAILED
Example
CALC:LIM:BURS:SST:RES?
Average SS Timing limit result is returned.
Characteristics
RST value: –
SCPI: device–specific
Mode
OFDM, OFDMA/WiBro
To Next Page
Loading...
