Saving and Recalling Settings Files - FILE Key R&S FSL
1300.2519.12 4.510 E-11
Saving and Recalling Settings Files - FILE Key
The FILE key is used to store and load instrument settings and to manage stored files.
The file menu includes functions for storing (Save softkey) instrument settings such as instrument
configurations (measurement/display settings, etc) and measurement results on permanent storage
media, or to load (Recall softkey) stored data back onto the instrument.
Functions for management of storage media (File Manager softkey) include among others functions for
listing, copying, and deleting/renaming files.
The R&S FSL is capable of internally storing complete instrument settings with instrument
configurations and measurement data in the form of settings files. The respective data are stored on the
internal flash disk or, if selected, on a memory stick or network drive. The mass media are assigned to
the volume names as follows:
Drive Designation Comment
C operating system, firmware and stored
instrument settings
for customer data
A USB floppy drive if connected
D USB memory stick or USB CD-ROM if connected
E ...Z additional USB mass storage devices or
mounted LAN volumes
if connected
To open the file menu
Press the FILE key.
The file menu is displayed.
Menu and softkey description
– "Softkeys of the file menu" on page 4.512
To display help to a softkey, press the HELP key and then softkey for which you want to display help.
To close the help window, press the ESC key. For further information refer to section "How to use the
Help System".
Further information
– "Navigation in the dialog boxes for saving and loading settings files" on page 4.511
– "Navigation in the file manager" on page 4.511
To Next Page
Loading...
