R&S FSL Saving and Recalling Settings Files - FILE Key
1300.2519.12 4.513 E-11
Menu / Command Submenu / Command Command
Disconnect Network Drive
Export
Import
Hardcopy
Save
Opens the Save dialog box to define and store the settings file. To navigate in the dialog box
and define/enter data, use the corresponding softkeys. For details see also "Navigation in the
dialog boxes for saving and loading settings files" on page 4.511.
Path Directory in which the settings file is stored. The default path for user
settings files is C:\r_s\instr\user
Files List of settings files already stored
File Name Name of settings file
Comment Comment regarding the settings file
[Items] Selection of items to be saved in the settings file
Save File / Recall File
Saves the settings file with the defined file name (Save dialog box), or recalls the selected
settings file (Recall dialog box). If the file name already exists, upon saving, a message is
displayed. Selecting Yes overwrites the existing file, selecting No aborts the saving process.
For details on the file name conventions refer to the Edit File Name softkey description.
This softkey is available from firmware version 1.70.
Remote: MMEM:STOR:STAT 1,'Save'
Remote: MMEM:STOR:STAT:NEXT
Remote: MMEM:LOAD:STAT 1,'C:\R_S\Instr\user\TEST01'
Select Path
Opens the directory list to select the drive and folder for the settings file to be stored or loaded.
The default path is C:\r_s\instr\user. For details see also "Navigation in the dialog boxes for
saving and loading settings files" on page 4.511.
Select File
Sets the focus on the Files list. For details see also "Navigation in the dialog boxes for saving
and loading settings files" on page 4.511.
Remote: MMEM:CAT? 'C:\R_S\Instr\user\*.DFL'
To Next Page
Loading...
