Instrument Functions - Basic Settings R&S FSL
1300.2519.12 4.490 E-11
Instrument Functions - Basic Settings
I
n this section, all basic settings functions of the R&S FSL and their application are explained in detail.
The analyzer functions are described in section "Instrument Functions - Analyzer".
For every key a table is provided in which all submenus and corresponding commands are listed. The
description of the submenus and commands follows the order of the table. The commands for the
optional remote control (if any) are indicated for each softkey. The description includes the following:
• "General Settings, Printout and Instrument Settings" on page 4.491
This section provides information on how to prepare measurements and process their results:
setting the instrument, managing and retrieving data, returning to manual operation, and printout.
More basic information on operation is given in the Quick Start Guide. The front and the rear view of the
instrument together with a table of all available keys and a short description are provided in chapter
"Front and Rear Panel". Chapter "Preparing for Use" informs how to start working with the instrument
for the first time. A brief introduction on handling the instrument is given in chapter "Basic Operations".
This includes also the description of the keys for basic operations like switching the instrument on and
off or starting a measurement.
To Next Page
Loading...
