Rohde & Schwarz R&S FSL3 - Initiate Subsystem (WCDMA, K72)

R&S FSL INITiate Subsystem (WCDMA, K72)
1300.2519.12 6.579 E-11
INITiate Subsystem (WCDMA, K72)
The INITiate subsystem is used to control the init–measurement function.
Commands of the INITiate Subsystem
– INITiate<1|2>[:IMMediate]
– INITiate<1|2>:CONTinuous
INITiate<1|2>[:IMMediate]
For details refer to "INITiate<1|2>[:IMMediate]" on page 6.146.
INITiate<1|2>:CONTinuous
For details refer to "INITiate<1|2>:CONTinuous" on page 6.147.