R&S FSL Documentation Overview
1300.2519.12 0.1 E-11
Documentation Overview
The user documentation for the R&S FSL is divided as follows:
• Quick Start Guide
• Online Help
• Operating Manual
• Internet Site
• Service Manual
• Release Notes
Quick Start Guide
This manual is delivered with the instrument in printed form and in PDF format on the CD. It provides the
information needed to set up and start working with the instrument. Basic operations and basic measurements
are described. Also a brief introduction to remote control is given. The manual includes general information
(e.g. Safety Instructions) and the following chapters:
Chapter 1 Front and Rear Panel
Chapter 2 Putting into Operation
Chapter 3 Firmware Update and Installation of Firmware Options
Chapter 4 Basic Operations
Chapter 5 Basic Measurement Examples
Chapter 6 Brief Introduction to Remote Control
Appendix A Printer Interface
Appendix B LAN Interface
Online Help
The Online Help is part of the firmware. It provides a quick access to the description of the instrument functions
and the remote control commands. For information on other topics refer to the Quick Start Guide, Operating
Manual and Service Manual provided in PDF format on CD or in the Internet. For detailed information on how
to use the Online Help, refer to the chapter "Basic Operations" in the Quick Start Guide.
Operating Manual
This manual is a supplement to the Quick Start Guide and is available in PDF format on the CD delivered with
the instrument. To retain the familiar structure that applies to all operating manuals of Rohde&Schwarz Test &
Measurement instruments, the chapters 1 and 3 exist, but only in form of references to the corresponding
Quick Start Guide chapters.
To Next Page
Loading...
