Rohde & Schwarz R&S FSL3 - Status Subsystem (Wimax, K92;K93)

R&S FSL STATus Subsystem (WiMAX, K92/K93)
1300.2519.12 6.851 E-11
STATus Subsystem (WiMAX, K92/K93)
The STATus subsystem contains the commands for the status reporting system (for details refer to
chapter 5 "Remote Control – Basics"). For the STATus:QUEStionable:LIMit register, the measurement
window is selected by LIMit 1 (screen A) or 2 (screen B). *RST does not influence the status registers.
Commands of the STATus Subsystem
– STATus:QUEStionable:LIMit<1|2> [:EVENt]?
– STATus:QUEStionable:LIMit<1|2>:CONDition?
– STATus:QUEStionable:LIMit<1|2>:ENABle
– STATus:QUEStionable:LIMit<1|2>:PTRansition
– STATus:QUEStionable:LIMit<1|2>:NTRansition
– STATus:QUEStionable:POWer[:EVENt]?
– STATus:QUEStionable:POWer:CONDition?
– STATus:QUEStionable:POWer:ENABle
– STATus:QUEStionable:POWer:PTRansition
– STATus:QUEStionable:POWer:NTRansition
– STATus:QUEStionable:SYNC[:EVENt]?
– STATus:QUEStionable:SYNC:CONDition?
– STATus:QUEStionable:SYNC:ENABle
– STATus:QUEStionable:SYNC:PTRansition
– STATus:QUEStionable:SYNC:NTRansition
STATus:QUEStionable:LIMit<1|2> [:EVENt]?
For details refer to "STATus:QUEStionable:LIMit<1|2>[:EVENt]?" on page 6.245.
STATus:QUEStionable:LIMit<1|2>:CONDition?
For details refer to "STATus:QUEStionable:LIMit<1|2>:CONDition?" on page 6.246.
STATus:QUEStionable:LIMit<1|2>:ENABle
For details refer to "STATus:QUEStionable:LIMit<1|2>:ENABle" on page 6.246.
STATus:QUEStionable:LIMit<1|2>:PTRansition
For details refer to "STATus:QUEStionable:LIMit<1|2>:PTRansition" on page 6.247.
STATus:QUEStionable:LIMit<1|2>:NTRansition
For details refer to "STATus:QUEStionable:LIMit<1|2>:NTRansition" on page 6.246.