Rohde & Schwarz R&S FSL3 - Mmemory Subsystem (Wimax, K92;K93)

MMEMory Subsystem (WiMAX, K92/K93) R&S FSL
1300.2519.12 6.832 E-11
MMEMory Subsystem (WiMAX, K92/K93)
The MMEMory (mass memory) subsystem provides commands to store and load IQ data.
Commands of the MMEMory Subsystem
– MMEMory:LOAD:FRAMe:STATe
– MMEMory:LOAD:IQ:STATe
– MMEMory:STORe:IQ:STATe
MMEMory:LOAD:FRAMe:STATe
This command loads a zone frame setup from the specified *.xml file. This file is created by a
R&S SMU signal generator in accordance to the IEEE 80216e–2005 standard.
Parameter
1,<file_name>
Example
MMEM:STOR:FRAM:STAT 1,'C:\R_S\Instr\user\data.xml'
Loads the zone frame setup from the specified file.
Characteristics
RST value: –
SCPI: device–specific
Mode
OFDMA/WiBro
MMEMory:LOAD:IQ:STATe
This command loads the IQ data from the specified *.iqw file.
Parameter
1,<file_name>
Example
MMEM:LOAD:IQ:STAT 1,'C:\R_S\Instr\user\data.iqw'
Loads IQ data from the specified file.
Characteristics
*RST value: –
SCPI: device–specific
Mode
OFDM, OFDMA/WiBro