Rohde & Schwarz R&S FSL3 - CDMA2000 BTS Analyzer (Option K82)

R&S FSL CDMA2000 BTS Analyzer (Option K82)
1300.2519.12 4.297 E-11
To edit a channel table
1. Enter the Channel Table Settings menu and the corresponding dialog box is displayed.
2. Select the channel table to be edited by marking the check box.
3. Press the Edit softkey and the Edit Channel Table dialog box is displayed.
Each row in the table represents one channel. Channels are displayed as entered and not sorted
automatically. To sort the channels use the Sort softkey (for details on how sorting is done see the
Sort softkey).
4. Enter a name and a description of the channel table in the Name and Description field.
5. Add and delete channels by using the corresponding softkeys.
6. To edit an existing channel put the focus on the parameter to be changed.
– Choose a channel type from the dropdown menu (opens with the ENTER key) in the Channel
Type column. No channel types other than the ones found in the list can be chosen.
– Assign a channel number in the Walsh Ch.SF column. Note that some channel types have
predefined values and can not be edited.
– Choose a radio configuration in the Radio Configuration column.
– Activate or deactivate a channel in State column.
– The columns Symbol Rate/ ksps, Power/ dB and Domain Conflict can not be edited. The
values are calculated automatically.
For further details also refer to the Edit channel table dialog box.
To create a channel table
1. Enter the Channel Table Settings menu and the corresponding dialog box is displayed.
2. Press the New softkey and a new channel table by the name 'ChannelTable' will be added. The
new channel table contains no channels by default.
For further details refer to the New softkey as well as "To edit a channel table" on page 4.297.
To copy a channel table
1. Enter the Channel Table Settings menu and the corresponding dialog box is displayed.
2. Select the channel table to be copied by marking the check box.
3. Press the Copy softkey and the channel table in focus is copied. The copy is named
'Copy of <SourceChannelTableName>. Except the name, all elements of the channel table in focus
are copied.
For further details refer to the Copy softkey as well as "To edit a channel table" on page
4.297.Measurements and result display