R&S FSL CDMA2000 BTS Analyzer (Option K82)
1300.2519.12 4.317 E-11
Edit
Opens the Edit Channel Table dialog box and the corresponding softkey menu.
The dialog box contains the following items (grey fields can not be modified):
Item Description
Name Enter the name of the selected channel table, which will be
saved under <name>.xml. Note that the old channel table
file is not deleted. The name is case sensitive and may not
contain spaces. It must be a valid MS Windows file name.
Description Further information about the channel table can be entered
Channel Type Select one of the channel types from the dropdown menu
Walsh Ch.SF Enter the Channel Number (Ch) and Spreading Factor (SF).
For some channel types the possible values are limited or
preset (e.g. F-PICH, F-TDPICH and F-PDCH).
Symbol Rate/ksps Display of the symbol rate
RC The Radio Configuration (RC) can be customized for only
two channel types. For the F-PDCH the values can be
10(QPSK), 10(8PSK) and 10(16QAM). For CHAN channels
the Radio Configuration can either be 1-2 or 3-5.
Power/dB Contains the measured relative code domain power. The
unit is dB. The fields are filled with values after pressing the
Meas softkey.
State Indicates whether a channel is active or inactive
DomainConflict A red bullet is shown if there's a conflict of any sort between
two or more channels (e.g. two conflicting channel codes)
Changes are never saved automatically. For that reason every time a change is made, the text
'*(unsaved changes)' appears in the title bar.
To Next Page
Loading...
