CDMA2000 BTS Analyzer (Option K82) R&S FSL
1300.2519.12 4.318 E-11
The corresponding softkey menu contains the following items:
Add Channel
Delete Channel
Meas
Sort
Save
Cancel
Reload
Remote: CONF:CDP:CTAB:NAME "NEW_TAB"
Add Channel
Inserts a new channel below the one selected. The default values for a new channel are:
ChannelType CHAN
Walsh Ch.SF 1.64
SymbolRate 19.2 ksps (automatically calculated)
RadioConfiguration 3-5
Power 0 dB (automatically calculated)
State Off
DomainConflict No (automatically calculated)
To change the channel type use the dropdown menu that opens when selecting / highlighting
the Channel Type field that should be changed and pressing the ENTER key. The radio
configuration settings are changed in the same way.
To change the channel number type another channel number in the form
'ChannelNumber.SpreadingFactor' or simply the code number (see Channel (Code) Number
for details) in the respective field and confirm the change with the ENTER key.
To activate or deactivate a channel, simply select the field and confirm with the ENTER key.
The R&S FSL automatically checks for conflicts between two active channels.
Remote: CONF:CDP:CTAB:DATA "0…13, 2…7, 0…127, 0…30, 0, 0, 0 | 1"
Delete Channel
Deletes the selected channel without further notice.
Meas
Initiates a measurement in Automatic Channel Search mode. The measurement results are
applied to the active channel table. The active channel table is overwritten without further notice.
The softkey is only available if the Auto Search mode is selected in the Channel Table
Settings dialog box.
To Next Page
Loading...
