R&S FSL CDMA2000 BTS Analyzer (Option K82)
1300.2519.12 4.315 E-11
Channel Table Settings
Opens the Channel Table Settings dialog box and the corresponding submenu.
Predefined channel tables are a way to customize measurements. The RECENT channel table
contains the last configuration used before switching from Auto Search to Predefined. The
BPC_RC4, MPC_RC1, MPC_RC4 and TDC_RC4 channel tables are included in the option per
default and are configured according to the standard. For details on the predefined channel
tables refer to Predefined Channel Tables on page 4.303. In addition, new channel tables can
be created and saved to be used in measurements. For details refer to the step by step
instructions on how To edit a channel table on page 4.297, To create a channel table on page
4.297 and To copy a channel table on page 4.297.
In the Channel Table Settings dialog box, the following parameters can be modified:
Channel Table
Inactive Channel Threshold
Channel Table Name
Channel Table (Channel Table Settings dialog box)
Defines the channel table used in the measurement.
Auto Search
Searches the whole code domain (all permissible symbol rates and
channel numbers) for active channels.
The automatic search provides an overview of the channels contained in
the signal. If channels are not detected as being active, change the
threshold (see Inactive Channel Threshold) or select the Predefined
channel search type.
Predefined
Performs the Code Domain Analyzer measurement on the basis of the
active predefined channel table (see Channel Table Name). All
channels of a channel table are assumed to be active. For details see
also Predefined Channel Tables on page 4.303.
Remote: CONF:CDP:CTAB[:STAT] ON
Remote: CONF:CDP:CTAB:SEL "MPC_RC4"
To Next Page
Loading...
