Rohde & Schwarz R&S FSL3 - Setup:tv Subsystem (CATV, K20)

R&S FSL SETup:TV Subsystem (CATV, K20)
1300.2519.12 6.509 E-11
SETup:TV Subsystem (CATV, K20)
The SETup:TV subsystem controls the modulation standard settings.
Commands of the SETup:TV Subsystem
– SETup:TV:STANdard
– SETup:TV:STANdard:AUDio
– SETup:TV:STANdard:COLor
SETup:TV:STANdard
This command sets the TV standard.
Parameter
BG | DK | I | K1 | L | M | N (analog TV)
J83A | J83B | J83C (digital TV)
Note: In the Video Scope measurement, the y–axis of the diagram is scaled in Volt for all TV
standards except M. If M is the selected TV standard, the y–axis of the diagram is
scaled in IRE.
Example
SET:TV:STAN DK
Sets the TV standard DK.
Characteristics
RST value: BG
SCPI: device–specific
Mode
CATV
SETup:TV:STANdard:AUDio
This command sets the sound system for analog TV measurements.
Parameter
FM55NICAM585 | FM55FM5742 | FM55MONO | FM65NICAM585 | FM65FM6258 |
FM65FM6742 | FM65MONO | FM60NICAM6552 | FM60MONO | AM65NICAM585 |
AM60MONO | FM45BTSC | FM45EIA_J | FM45FM4742 | FM45MONO
Example
SET:TV:STAN:AUD FM65MONO
Sets the sound system FM65MONO.
Characteristics
RST value: FM65FM6742
SCPI: device–specific
Mode
CATV