Rohde & Schwarz R&S FSL3 - Page 1267

SENSe Subsystem (CATV, K20) R&S FSL
1300.2519.12 6.508 E-11
[
SENSe<1|2>:]TV:TILT:MSTandard:CENable
This command activates a modulation standard for the Tilt measurement.
T
he numeric suffixes <1|2> are irrelevant.
Parameter
<string>: modulation standard name
Example
CONF:TV:CTAB:SEL 'TV–ITALY'
Activates the channel table TV–ITALY.
CONF:TV:MEAS TILT
Configures the R&S FSL to measure the channel power of every channel.
TV:TILT:MST:CEN 'PAL BG ITALY'
Activates the modulation standard PAL BG ITALY.
Characteristics
RST value: –
SCPI: device–specific
Mode
CATV