Rohde & Schwarz R&S FSL3 - Input Subsystem (Wimax, K92;K93)

INPut Subsystem (WiMAX, K92/K93) R&S FSL
1300.2519.12 6.830 E-11
INPut Subsystem (WiMAX, K92/K93)
The INPut subsystem controls the input characteristics of the RF inputs of the instrument.
Commands of the INPut Subsystem
– INPut:ATTenuation
– INPut:SELect
INPut:ATTenuation
For details refer to "INPut<1|2>:ATTenuation" on page 6.150.
INPut:SELect
This command specifies the RF input as currently selected signal input.
Parameter
RF
Example
INPut:SEL RF
Selects RF input.
Characteristics
RST value: RF
SCPI: conform
Mode
OFDM, OFDMA/WiBro