Setting the Bandwidths and Sweep Time – BW Key R&S FSL
1300.2519.12 4.18 E-11
Setting the Bandwidths and Sweep Time – BW Key
The BW key is used to set the resolution bandwidth, video bandwidth (VBW) and sweep time (SWT).
The values available for resolution bandwidth and video bandwidth depend on the selected filter type.
For details on channel filters see also "List of available RRC and channel filters" on page 4.20.
To open the bandwidth menu
Press the BW key.
The bandwidth menu is displayed.
Menu and softkey description
– "Softkeys of the bandwidth menu" on page 4.22
To display help to a softkey, press the HELP key and then the softkey for which you want to display
help. To close the help window, press the ESC key. For further information refer to section "How to use
the Help System".
Further information
– "List of available RRC and channel filters" on page 4.20
Tasks
– To specify the bandwidth
– To choose the appropriate filter type
To Next Page
Loading...
