R&S FSL CALCulate Subsystem (Analog Demodulation, K7)
1300.2519.12 6.285 E-11
CALCulate Subsystem (Analog Demodulation, K7)
The CALCulate subsystem contains commands for converting instrument data, transforming and
carrying out corrections. These functions are carried out subsequent to data acquisition, i.e. following
the SENSe subsystem.
The following subsystems are included:
• "CALCulate:DELTamarker Subsystem" on page 6.285
• "CALCulate:FEED Subsystem" on page 6.286
• "CALCulate:FORMat Subsystem (Analog Demodulation, K7)" on page 6.287
• "CALCulate:MARKer Subsystem" on page 6.288
• "CALCulate:UNIT Subsystem" on page 6.294
CALCulate:DELTamarker Subsystem (Analog Demodulation, K7)
The CALCulate:DELTamarker subsystem controls the delta marker functions of the instrument.
Commands of the CALCulate:DELTamarker Subsystem
– CALCulate<1|2>:DELTamarker<1...4>:Y?
CALCulate<1|2>:DELTamarker<1...4>:Y?
Depending on the unit defined with CALCulate<1|2>:UNIT:POWer or on the activated
measuring functions, the query result is output in the units below:
Result display Output unit
AM result display (R&S FSL–K7) % (lin)
dB (log)
FM result display (R&S FSL–K7) Hz (lin)
dB (log)
PM result display (R&S FSL–K7) rad | deg (lin)
dB (log)
RF result display (R&S FSL–K7)
output unit defined with CALCulate<1|2>:UNIT:POWer
For further details refer to "CALCulate<1|2>:DELTamarker<1...4>:Y?" on page 6.22.
To Next Page
Loading...
