Rohde & Schwarz R&S FSL3 - Page 1053

CALCulate Subsystem (Analog Demodulation, K7) R&S FSL
1300.2519.12 6.294 E-11
CALCulate:UNIT Subsystem (Analog Demodulation, K7)
The CALCulate:Unit subsystem defines the units for the parameters that can be set and the
measurement results.
Commands of the CALCulate:UNIT Subsystem
– CALCulate<1|2>: UNIT:ANGLe
CALCulate<1|2>: UNIT:ANGLe
This command selects the unit for angles.
Parameter
DEG | RAD
Example:
CALC:UNIT:ANGL DEG
Characteristics:
*RST value: RAD
SCPI: device–specific
Mode
ADEMOD