Rohde & Schwarz R&S FSL3 - Calculate:marker Subsystem (BLUETOOTH, K8)

CALCulate:MARKer Subsystem (BLUETOOTH, K8) R&S FSL
1300.2519.12 6.354 E-11
CALCulate:MARKer Subsystem (BLUETOOTH, K8)
The CALCulate:MARKer subsystem checks the marker functions of the instrument.
Commands of the CALCulate:MARKer Subsystem
– CALCulate<1|2>:MARKer<1...4>:PEXCursion
– CALCulate<1|2>:MARKer<1...4>:Y?
CALCulate<1|2>:MARKer<1...4>:PEXCursion
The unit depends on the selected operating mode.
Example
CALC:MARK:PEXC 100 HZ
Defines peak excursion 100 Hz
Characteristics
RST value: 6dB
For further details refer to "CALCulate<1|2>:MARKer<1...4>:PEXCursion" on page 6.63.
CALCulate<1|2>:MARKer<1...4>:Y?
If the analog demodulator (option Analog Demodulation, R&S FSL–K7) is activated, the query
result is output in the following units:
Result display Output unit
AM %
FM Hz
PM
rad/deg (defined with UNIT:ANGLe)
RF output unit defined with
CALCulate<1|2>:UNIT:POWer
For further details refer to "CALCulate<1|2>:MARKer<1...4>:Y?" on page 6.66.