Rohde & Schwarz R&S FSL3 - Page 1090

R&S FSL UNIT Subsystem (Analog Demodulation, K7)
1300.2519.12 6.331 E-11
UNIT Subsystem (Analog Demodulation, K7)
The UNIT subsystem sets the basic unit of the setting parameters.
Commands of the UNIT Subsystem
– UNIT:ANGLe
UNIT:ANGLe
This command selects the unit for angles.
Parameter
DEG | RAD
Example
UNIT:ANGL DEG
Characteristics
RST value: RAD
SCPI: conform
Mode
ADEMOD