Rohde & Schwarz R&S FSL3 - Source Subsystem

R&S FSL SOURce Subsystem
1300.2519.12 6.235 E-11
SOURce Subsystem
The SOURce subsystem controls the output signals of the instrument.
The following subsystem is included:
• "SOURce:POWer Subsystem" on page 6.235
Commands of the SOURce subsystem
– SOURce<1|2>:EXTernal<1|2>:ROSCillator[:SOURce]
– SOURce:TEMPerature:APRobe?
SOURce<1|2>:EXTernal<1|2>:ROSCillator[:SOURce]
This command switches between external and internal reference oscillator.
Parameter
INTernal | EXTernal
Example
SOUR:EXT:ROSC EXT
Switches to external reference oscillator
Characteristics
*RST value: INT
SCPI: device-specific
Mode
all
SOURce:TEMPerature:APRobe?
This command queries the sensor temperature.
Parameter
1 (CPU)
Example
SOUR:TEMP:APR? 1
Queries the temperature of the CPU sensor.
Characteristics
RST value: -
SCPI: device-specific
Mode
all