Rohde & Schwarz R&S FSL3 - Calculate Subsystem (WCDMA, K72)

CALCulate Subsystem (WCDMA, K72) R&S FSL
1300.2519.12 6.566 E-11
CALCulate Subsystem (WCDMA, K72)
The CALCulate subsystem contains commands for converting instrument data, transforming and
carrying out corrections. These functions are carried out subsequent to data acquisition, i.e. following
the SENSe subsystem.
The following subsystems are included:
• "CALCulate:DELTamarker Subsystem (WCDMA, K72)" on page 6.566
• "CALCulate:FEED Subsystem (WCDMA, K72)" on page 6.569
• "CALCulate:LIMit:ESPectrum (WCDMA, K72)" on page 6.570
• "CALCulate:MARKer Subsystem (WCDMA, K72)" on page 6.573
CALCulate:DELTamarker Subsystem (WCDMA, K72)
The CALCulate:DELTamarker subsystem controls the delta marker functions of the instrument.
Commands of the CALCulate:DELTamarker Subsystem
– CALCulate<1|2>:DELTamarker<1...4>[:STATe]
– CALCulate<1|2>:DELTamarker<1...4>:AOFF
– CALCulate<1|2>:DELTamarker<1...4>:FUNCtion:CPICh
– CALCulate<1|2>:DELTamarker<1...4>:FUNCtion:PCCPch
– CALCulate<1|2>:DELTamarker<1...4>:MAXimum[:PEAK]
– CALCulate<1|2>:DELTamarker<1...4>:MAXimum:LEFT
– CALCulate<1|2>:DELTamarker<1...4>:MAXimum:NEXT
– CALCulate<1|2>:DELTamarker<1...4>:MAXimum:RIGHt
– CALCulate<1|2>:DELTamarker<1...4>:MINimum[:PEAK]
– CALCulate<1|2>:DELTamarker<1...4>:MINimum:LEFT
– CALCulate<1|2>:DELTamarker<1...4>:MINimum:NEXT
– CALCulate<1|2>:DELTamarker<1...4>:MINimum:RIGHt
– CALCulate<1|2>:DELTamarker<1...4>:X
– CALCulate<1|2>:DELTamarker<1...4>:X:RELative?
– CALCulate<1|2>:DELTamarker<1...4>:Y?
CALCulate<1|2>:DELTamarker<1...4>[:STATe]
For details refer to "CALCulate<1|2>:DELTamarker<1...4>[:STATe]" on page 6.12.
CALCulate<1|2>:DELTamarker<1...4>:AOFF
For details refer to "CALCulate<1|2>:DELTamarker<1...4>:AOFF" on page 6.13.