Rohde & Schwarz R&S FSL3 - Bluetooth Technical Parameters; Power Classes

R&S FSL Bluetooth Measurements (Option K8)
1300.2519.12 2.37 E-11
Bluetooth technical parameters
Table 2–1 Common Parameters
frequency bands 2402 + (0...78) MHz
channel spacing 1 MHz
symbol rate 1 Msym/s
slot length
(frequency hopping)
625 µsec
packet sizes 1, 3, 5 slot packets
Table 2–2 Modulation Parameters Basic Rate
modulation GFSK
TX filter Gaussian
BT / 0.5
modulation index 0.28 – 0.35 nominal 0.32
frequency deviation 160 kHz settled
141 kHz 010101 suite
bandwidth
–3dB
–20dB
220 kHz
1 MHz
bit rate 1 Mbps
Table 2–3 Modulation Parameters Enhanced Data Rate
modulation T/4–DQPSK 8DPSK
TX filter RRC RRC
roll–off factor 0.4 0.4
bandwidth –3dB ± 500kHz ± 500kHz
bit rate 2 Mbps 3 Mbps
Power classes
Power Class Maximum (P
max
) Nominal Minimum (P
min
) Power Control
1 100 mW (20 dBm) 1 mW (0 dBm) from P
min
(< +4 dBm) to
P
max
2 2.5 mW (4dBm) 1 mW (0 dBm) 0.25 mW (–6dBm) optional
3 1 mW (0dBm) optional