Rohde & Schwarz R&S FSL3 - Calculate:deltamarker Subsystem (BLUETOOTH, K8)

R&S FSL CALCulate:DELTamarker Subsystem (BLUETOOTH, K8)
1300.2519.12 6.353 E-11
CALCulate:DELTamarker Subsystem (BLUETOOTH, K8)
The CALCulate:DELTamarker subsystem controls the delta marker functions of the instrument.
Commands of the CALCulate:DELTamarker Subsystem
– CALCulate<1|2>:DELTamarker<1...4>:Y?
CALCulate<1|2>:DELTamarker<1...4>:Y?
Depending on the unit defined with CALCulate<1|2>:UNIT:POWer or on the activated
measuring functions, the query result is output in the units below:
Result display Output unit
OUTPUT POWER result display dB
TX SPECTRUM ACP result display dB
MODULATION CHARACTERISTICS result display Hz
INITIAL CARR FREQ TOL result display Hz
CARRIER FREQ DRIFT result display Hz
RELATIVE TX POWER dB
IN–BAND SPURIOUS EMISSIONS dB
CARRIER FREQUENCY STABILITY –
DIFF PHASE ENCODING –
For further details refer to "CALCulate<1|2>:DELTamarker<1...4>:Y?" on page 6.22.