Rohde & Schwarz R&S FSL3 - Trigger Subsystem (WCDMA, K72)

R&S FSL TRIGger Subsystem (WCDMA, K72)
1300.2519.12 6.595 E-11
TRIGger Subsystem (WCDMA, K72)
The TRIGger subsystem is used to synchronize instrument actions with events. It is thus possible to control
and synchronize the start of a sweep.
Commands of the TRIGger Subsystem
– TRIGger<1|2>[:SEQuence]:SOURce
TRIGger<1|2>[:SEQuence]:SOURce
Parameter
IMMediate (Free Run) | EXTernal | IFPower
For further details refer to "TRIGger<1|2>[:SEQuence]:SOURce" on page 6.280.