INITiate Subsystem (WLAN, K91 / K91n) R&S FSL
1300.2519.12 6.722 E-11
INITiate Subsystem (WLAN, K91 / K91n)
The INITiate subsystem configures the instrument prior to a measurement being carried out. It is
basically used to tell the instrument which measurement is to be performed and takes any necessary
step to set up the instrument for the measurement.
Commands of the INITiate Subsystem
– INITiate[:IMMediate]
– INITiate:CONTinuous
INITiate[:IMMediate]
For details refer to "INITiate<1|2>[:IMMediate]" on page 6.146.
INITiate:CONTinuous
For details refer to "INITiate<1|2>:CONTinuous" on page 6.147.
To Next Page
Loading...
