Rohde & Schwarz R&S FSL3 - Input Subsystem (Noise Figure, K30)

INPut Subsystem (Noise Figure, K30) R&S FSL
1300.2519.12 6.546 E-11
INPut Subsystem (Noise Figure, K30)
The INPut subsystem controls the input characteristics of the RF inputs of the instrument.
Commands of the INPut Subsystem
– INPut<1|2>:ATTenuation
– INPut<1|2>:GAIN:STATe (option RF Preamplifier, B22)
INPut<1|2>:ATTenuation
For details refer to "INPut<1|2>:ATTenuation" on page 6.150.
INPut<1|2>:GAIN:STATe (option RF Preamplifier, B22)
For details refer to "INPut<1|2>:GAIN:STATe" on page 6.151.