Triggering the Sweep – TRIG Key R&S FSL
1300.2519.12 4.28 E-11
Triggering the Sweep – TRIG Key
The TRIG key is used to set trigger mode, trigger threshold, trigger delay, trigger polarity and for gated
sweep the gate configuration.
To open the trigger menu
Press the TRIG key.
The trigger menu is displayed.
Menu and softkey description
– "Softkeys of the trigger menu" on page 4.33
To display help to a softkey, press the HELP key and then the softkey for which you want to display
help. To close the help window, press the ESC key. For further information refer to section "How to use
the Help System".
Further information
– "Trigger mode overview" on page 4.31
Tasks
– To specify the trigger settings
– To use gated sweep operation (option Gated Sweep, B8)
– To trigger on TV signals (zero span and option TV Trigger, B6)
To Next Page
Loading...
