Remote Commands of the CDMA2000 BTS Analyzer Option (K82) R&S FSL
1300.2519.12 6.614 E-11
SENSe Subsystem (CDMA, K82)
The SENSe subsystem controls the essential parameters of the analyzer. In accordance with the SCPI
standard, the keyword "SENSe" is optional for this reason, which means that it is not necessary to
include the SENSe node in command sequences.
The following subsystems is included:
• "SENSe:CDPower Subsystem (CDMA, K82)" on page 6.615
• "SENSe:ESPectrum Subsystem (CDMA, K82)" on page 6.623
To Next Page
Loading...
