Rohde & Schwarz R&S FSL3 - Page 1382

R&S FSL SENSe Subsystem (CDMA, K82)
1300.2519.12 6.623 E-11
SENSe:ESPectrum Subsystem (CDMA, K82)
This subsystem sets the parameters for the code domain measurements mode. The numeric suffix at
SENSe<1|2> is irrelevant.
Commands of the SENSe:ESPectrum Subsystem
– [SENSe<1|2>:]ESPectrum:PRESet[:STANdard]
– [SENSe<1|2>:]ESPectrum:PRESet:RESTore
– [SENSe<1|2>:]ESPectrum:STORe
[SENSe<1|2>:]ESPectrum:PRESet[:STANdard]
For details refer to the [SENSe<1|2>:]ESPectrum:PRESet[:STANdard] command of the base
unit on page 6.189.
[SENSe<1|2>:]ESPectrum:PRESet:RESTore
For details refer to the [SENSe<1|2>:]ESPectrum:PRESet:RESTore command of the base unit
on page 6.190.
[SENSe<1|2>:]ESPectrum:STORe
This command saves the specified XML file under C:\r_s\instr\sem_std. To save the file in
subdirectory, include the relative path.
The numeric suffixes <1|2> are not relevant.
This command is an event and therefore has no *RST value and no query.
Example
ESP:STOR 'CDMA2000\DL\BandClass_20.xml'
Saves the BandClass_20.xml XML file in the C:\R_S\instr\sem_std\CDMA2000\DL directory.
Characteristics
RST value: –
SCPI: device–specific
Mode
CDMA