Remote Commands of the CDMA2000 BTS Analyzer Option (K82) R&S FSL
1300.2519.12 6.622 E-11
Example
INST:SEL BC2K
Activates the CDMA2000 BTS Analyzer option.
INIT:CONT OFF
Selects single sweep.
CDP:TPM ON
Activates timing and phase offset.
INIT;*WAI
Starts measurement with synchronization.
CDP:SLOT 2
Selects power control group 2.
CDP:CODE 11
Selects code number 11.
CALC:MARK:FUNC:CDP:RES? TOFF
Reads out timing offset of the code with number 11 in PCG 2.
CALC:MARK:FUNC:CDP:RES? POFF
Reads out the phase offset of the code with number 11 in PCG 2.
Characteristics
RST value: OFF
SCPI: device-specific
Mode
CDMA
To Next Page
Loading...
