Rohde & Schwarz R&S FSL3 - Instrument Subsystem

R&S FSL INSTrument Subsystem
1300.2519.12 6.153 E-11
INSTrument Subsystem
The INSTrument subsystem selects the operating mode of the unit either via text parameters or fixed
numbers.
Commands of the INSTrument Subsystem
– INSTrument[:SELect]
– INSTrument:NSELect
INSTrument[:SELect]
This command switches between the measurement modes by means of text parameters.
Parameter
SANalyzer spectrum analyzer
The parameters of the other measurement modes are included in the option descriptions.
Example
INST SAN
Switches the instrument to spectrum analyzer mode.
Characteristics
*RST value: SANalyzer
SCPI: conform
Mode
all
INSTrument:NSELect
This command switches between the measurement modes by means of numbers.
Parameter
1 spectrum analyzer
The parameters of the other measurement modes are included in the option descriptions.
Example
INST:NSEL 1
Switches the instrument to spectrum analyzer mode.
Characteristics
*RST value: 1
SCPI: conform
Mode
all