Rohde & Schwarz R&S FSL3 - Configure:wcdpower Subsystem (WCDMA, K72)

CONFigure:WCDPower Subsystem (WCDMA, K72) R&S FSL
1300.2519.12 6.576 E-11
CONFigure:WCDPower Subsystem (WCDMA, K72)
The CONFigure subsystem contains commands for configuring the measurements.
Commands of the CONFigure:WCDPower Subsystem
– CONFigure:WCDPower:[BTS]:MEASurement
CONFigure:WCDPower:[BTS]:MEASurement
This command selects the measurements with their predefined settings according to the 3GPP
standard.
Parameter
ACLR adjacent–channel power measurement
ESPectrum measurement of spectrum emission mask
POWer channel power measurement
WCDPower code domain power measurement
Example
CONF:WCDP:MEAS POW
Selects the channel power measurement.
Characteristics
RST value: WCDP
SCPI: device–specific
Mode
WCDMA