Changing Settings via Markers – MKR–> Key R&S FSL
1300.2519.12 4.66 E-11
Changing Settings via Markers – MKR–> Key
The MKR–> key is used for search functions of measurement markers, assignment of the marker
frequency as center frequency, restriction of the search area and characterization of maxima and
minima. For details on markers in general, see "Using Markers and Delta Markers – MKR Key" on page
4.53.
To open the marker–> menu
Press the MKR–> key.
The marker–> menu is displayed. If no marker is active, marker 1 will be activated and a peak
search on the trace carried out. Otherwise, the edit dialog box for the last activated marker is
opened and the current frequency / time value is displayed.
Menu and softkey description
– "Softkeys of the marker–> menu" on page 4.70
To display help to a softkey, press the HELP key and then the softkey for which you want to display
help. To close the help window, press the ESC key. For further information refer to section "How to use
the Help System".
Further information
– "Effect of different peak excursion settings (example)" on page 4.68
Tasks
– To search for a maximum
– To search for a minimum
– To specify the search limits
– To specify the search range
– To examine a signal at the center in detail
– To specify the suitable peak excursion
To Next Page
Loading...
