R&S FSL Using Markers and Delta Markers – MKR Key
1300.2519.12 4.65 E-11
S
tepsize Sweep Points
Moves the marker or delta marker from one measured value to the next, if the marker or delta
marker value is changed via the rotary knob (Marker 1/Marker 2/Marker 3/Marker 4 softkeys). If
more measured values than measurement points exist, every single measured value is
accessible and its value is displayed in the marker field.
The number of measured values is defined in the sweep menu via the Sweep Points softkey.
This functionality is available for all base unit measurements with the exception of statistics
(APD and CCDF softkeys in the measurement menu).
This softkey is available from firmware version 1.60.
Remote: CALC:MARK:X:SSIZ POIN
To Next Page
Loading...
