Rohde & Schwarz R&S FSL3 - Trace Subsystem (CATV, K20)

TRACe Subsystem (CATV, K20) R&S FSL
1300.2519.12 6.516 E-11
TRACe Subsystem (CATV, K20)
The TRACe subsystem controls access to the instruments internal trace memory.
Commands of the TRACe Subsystem
– TRACe<1|2>[:DATA]
– TRACe:COPY
TRACe<1|2>[:DATA]
Parameter
TRACE1 | TRACE2 | TRACE3 | TRACE4,<block> | <numeric_value>
TRACE1 to TRACE4 trace memory to be read out
<block> or <numeric_value> data to be transferred
For further details refer to "TRACe<1|2>[:DATA]" on page 6.263.
TRACe:COPY
Parameter
TRACE1 | TRACE2 | TRACE3 | TRACE4,TRACE1 | TRACE2 | TRACE3 | TRACE4
The first operand the destination of the data to be copied, the second operand describes the
source.
For further details refer to "TRACe:COPY" on page 6.264.