Rohde & Schwarz R&S FSL3

To Next Page

To Previous Page

TRACe Subsystem R&S FSL

1300.2519.12 6.264 E-11

eturn values for Spectrum Emission Mask/Spurious Emissions measurement results

Returns the list evaluation results.

<no>, <start>, <stop>, <rbw>, <freq>, <power abs>, <power rel>, <delta>, <limit check>,

Value Description

<no> range number

<start> start frequency

<stop> stop frequency

<rbw> resolution bandwidth of range

<freq> frequency of peak

<power abs> absolut power in dBm of peak

<power rel> relative power in dBc (related to the channel power) of peak

<delta> distance to the limit line in dB (positive indicates value above the limit, fail)

<limit check> limit fail (pass = 0, fail =1)

<unused1> reserved (0.0)

<unused2> reserved (0.0)

Example

TRAC TRACE1

TRAC? TRACE1

Characteristics

*RST value: –

SCPI: conform

Mode

all

TRACe:COPY

This command copies data from one trace to another.

This command is an event and therefore has no query and no *RST value.

Parameter

TRACE4 | TRACE5 | TRACE6

The first operand the destination of the data to be copied, the second operand describes the

source.

Example

TRAC:COPY TRACE1,TRACE2

Characteristics

*RST value: –

SCPI: conform

Mode

A, CATV

Rohde & Schwarz R&S FSL3 - Page 1023