Bluetooth Measurements (Option K8) R&S FSL
1300.2519.12 2.36 E-11
Bluetooth Measurements (Option K8)
This section gives background information on Bluetooth Measurements (option K8). It provides
information on the following topics:
Bluetooth Overview
Supported Tests
Overview of Transmitter Tests
Functional Description – Block Diagram
Bandwidths
Measurement Filter (Meas Filter On)
Oversampling
Determining Average or Max/Min Values
Trigger Concepts
For further information on measurement examples refer also to the Quick Start Guide, chapter 5 "Basic
Measurement Examples".
This option is available from firmware version 1.30.
Bluetooth Overview
This section provides the following general information on Bluetooth measurements:
Bluetooth technical parameters
Power classes
Structure of a Bluetooth data packet
To Next Page
Loading...
