Rohde & Schwarz R&S FSL3 - UNIT Subsystem

R&S FSL UNIT Subsystem
1300.2519.12 6.283 E-11
UNIT Subsystem
The UNIT subsystem sets the basic unit of the setting parameters.
Commands of the UNIT Subsystem
– UNIT<1|2>:POWer
UNIT<1|2>:POWer
This command selects the default unit.
Parameter
DBM | V | A | W | DBPW | WATT | DBPT | DBUV | DBMV | VOLT | DBUA | AMPere
Example
UNIT:POW DBUV
Sets the power unit to dBm.
Characteristics
*RST value: DBM
SCPI: conform
Mode
A