Changing Settings via Markers – MKR–> Key R&S FSL
1300.2519.12 4.70 E-11
Softkeys of the marker–> menu
The following table shows all softkeys available in the marker–> menu. It is possible that your
instrument configuration does not provide all softkeys. If a softkey is only available with a special option,
model or (measurement) mode, this information is delivered in the corresponding softkey description.
If the Spectrogram Measurement option (K14) is activated, this menu provides additional functionality.
F
or details refer to "Softkeys of the marker–> menu (Spectrogram view)" on page 4.197.
Menu / Command Command
Select 1 2 3 4
Peak
Next Peak
Next Peak Mode < abs >
Center =Mkr Freq
Ref Lvl =Mkr Lvl
More
Select 1 2 3 4
Min
Next Min
Next Min Mode < abs >
Search Limits Left Limit
Right Limit
Threshold
Search Lim Off
Peak Excursion
More
Exclude LO
Auto Max Peak/Auto Min Peak
Select 1 2 3 4
Selects the normal marker or the delta markers, activates the marker and opens an edit dialog
box to enter a value for the marker to be set to.
stands for delta marker 1.
If the Spectrogram Measurement option (K14) is activated, the edit dialog box for markers and
delta markers is extended. For details refer to "Markers and marker values" on page 4.193.
Remote: CALC:MARK1 ON
Remote: CALC:MARK1:X <value>
Remote: CALC:MARK1:Y?
To Next Page
Loading...
