Changing Settings via Markers – MKR–> Key R&S FSL
1300.2519.12 4.74 E-11
Auto Max Peak / Auto Min Peak
Adds an automatic peak search action for marker 1 at the end of each particular sweep. This
function may be used during adjustments of a device under test to keep track of the actual peak
marker position and level.
The actual marker search limit settings (Left Limit, Right Limit, Threshold, Exclude LO
softkeys) are taken into account.
This softkey is available from firmware version 1.50.
Remote: CALC:MARK:MIN:AUTO ON
Remote: CALC:MARK:MAX:AUTO ON
To Next Page
Loading...
