Rohde & Schwarz R&S FSL3 - Page 1047

CALCulate Subsystem (Analog Demodulation, K7) R&S FSL
1300.2519.12 6.288 E-11
CALCulate:MARKer Subsystem (Analog Demodulation, K7)
The CALCulate:MARKer subsystem checks the marker functions of the instrument.
The following subsystem is included:
• "CALCulate:MARKer:FUNCtion:ADEMod Subsystem (Analog Demodulation, K7)" on page 6.289
Commands of the CALCulate:MARKer Subsystem
– CALCulate<1|2>:MARKer<1...4>:PEXCursion
– CALCulate<1|2>:MARKer<1...4>:Y?
CALCulate<1|2>:MARKer<1...4>:PEXCursion
The unit depends on the active display.
Example
CALC:MARK:PEXC 100 HZ
Defines peak excursion 100 Hz
Characteristics
*RST value:
6dB RF displays
5 PCT AM displays
50 kHz FM displays
0.5 RAD PM displays
For further details refer to "CALCulate<1|2>:MARKer<1...4>:PEXCursion" on page 6.63.
CALCulate<1|2>:MARKer<1...4>:Y?
If the analog demodulator (option Analog Demodulation, R&S FSL–K7) is activated, the query
result is output in the following units:
Result display Output unit
AM %
FM Hz
PM
rad/deg (defined with CALCulate<1|2>: UNIT:ANGLe)
RF
output unit defined with CALCulate<1|2>:UNIT:POWer
For further details refer to "CALCulate<1|2>:MARKer<1...4>:Y?" on page 6.66.