Rohde & Schwarz R&S FSL3 - Page 488

R&S FSL CDMA2000 BTS Analyzer (Option K82)
1300.2519.12 4.303 E-11
Predefined Channel Tables
Predefined channel tables offer access to a quick configuration for the channel search. The CDMA2000
BTS Analyzer option provides the following set of channel tables compliant with the CDMA2000
specification:
• RECENT
This channel table always appears first in the list. It contains the channels that were automatically
created during the last measurement with Auto Search channels activated (for details refer to
Channel Table Settings).
• MPC_RC1 (Base Station Main Path 6 Channels Radio Configuration 1)
Channel table with F-PICH/F-SYNC/F-PCH and 6 data channels (see Table 4-10).
• MPC_RC4 (Base Station Main Path 6 Channels Radio Configuration 4)
Channel table with F-PICH/F-SYNC/F-PCH and 6 data channels (see Table 4-11).
• TDC_RC4 (Base Station Transmit Diversity Path 6 Channels Radio Configuration 4)
Channel table with F-PICH/F-SYNC/F-PCH and 6 data channels (see Table 4-12).
In addition to the compliant channel tables, the following channel tables are defined:
• BPC_RC4 (Base Station Both Paths 6 Channels Radio Configuration 4)
Channel table with F-PICH/F-TDPICH/F-SYNC/F-PCH and 6 data channels (see Table 4-13).
– The standard does not specify a channel number for the data channels. If you wish to use
channels other than those in the predefined channel tables, you may copy the original tables
and adapt the channels in the copy. For details refer to the step-by-step instructions "To edit a
channel table", "To create a channel table" and "To copy a channel table".
Table 4-10: Base station channel table for main branch in radio configuration 1
Channel type Number of
channels
Radio
configuration
Code channel
(Walsh Code.SF)
F-PICH 1 – 0.64
F-SYNC 1 – 32.64
F-PCH 1 – 1.64
CHAN 6 1
1
1
1
1
1
9.64
10.64
11.64
15.64
17.64
25.64