Rohde & Schwarz R&S FSL3 - Page 1612

R&S FSL STATus Subsystem (WiMAX, K92/K93)
1300.2519.12 6.853 E-11
STATus:QUEStionable:SYNC:ENABle
This command sets the bits of the ENABle section of the STATus:QUEStionable:SYNC register.
The ENABle register selectively enables the individual events of the associated EVENt section
for the summary bit.
Parameter
0 to 65535
Example
STAT:QUES:SYNC:ENAB 65535
All events bits will be represented in the SYNC summary bit.
Characteristics
*RST value: –
SCPI: device–specific
Mode
OFDM, OFDMA/WiBro
STATus:QUEStionable:SYNC:PTRansition
This command determines what bits in the STATus:QUEStionable:SYNC Condition register will
set the corresponding bit in the STATus:QUEStionable:SYNC Event register when that bit has a
positive transition (0 to 1). The variable <number> is the sum of the decimal values of the bits
that are to be enabled.
Parameter
0 to 65535
Example
STAT:QUES:SYNC:PTR 65535
All condition bits will be summarized in the Event register when a positive transition occurs.
Characteristics
*RST value: –
SCPI: device–specific
Mode
OFDM, OFDMA/WiBro